The construction of your new pool is when it begins to take shape. Depending on your builder, they may use the gunite or shotcrete process.
Gunite is a dry concrete mix shot from a hose with pressurized air around a steel reinforcement grid to form your pool’s shell. This process also allows your builder to make adjustments in real-time.
Determine the Location
Choosing to build an inground concrete pool can feel overwhelming for new homeowners unfamiliar with the terms, technologies, and processes professional pool builders toss around daily. Understanding these terms is vital to ensure you have a solid grasp of your pool project’s timeline and options.
When using gunite, pool builders load dry concrete into a hopper and use compressed air to shoot the concrete out of a shotcrete or gunite nozzle. This spray-on concrete is mixed with water at the nozzle, which allows your pool builder to control the ratio of dry material to wet concrete being applied.
It also reduces the risk of cracking, as premixed concrete used in any construction process can crack when sprayed and cured too quickly. Rest assured that cracks can be repaired effectively, albeit at a cost.
Prep the Area
Gunite and shotcrete are the two main types of concrete pools. Shotcrete is a wet mix from the cement truck and is stacked up to form your pool walls. Gunite is dry and sprayed on with a gunite nozzle. Your pool builder will have a preferred method of construction that they are more comfortable with, but both ways can produce a high-quality finished product.
To avoid accidental damage to your new liner, shut off power to the pool light junction box (usually located behind the pool wall near the diving board). Then, duct tape a long piece of string to the cord and run it down into the J-box and the pool niche. Leave 3-4 feet of line coiled up inside the slot.
Install the Frame
Take a moment to think about your pool’s features and customization options before moving forward with the installation. Your builder can provide more accurate timelines after assessing your backyard.
Concrete pools can last 30 years or more if well-maintained. However, they can require acid wash treatments every three to five years and resurfacing every decade.
Shotcrete is cement pulled from the back of the truck that must be stacked to form your pool walls. It can lead to cracking. Gunite is a dry mix that consists of sand and cement blown through a hose with water added to the nozzle so the applicator can control how much water goes into the mix.
With the assistance of a qualified contractor for replacement windows Dublin, OH, remove the old windows and sash weights, insert a foam backer rod into the space between the window frame and the wall, and then caulk the window’s exterior.
Install the Glass
The pool-building world can be overwhelming for homeowners unaccustomed to the terminology, technologies, and processes professional pool builders use daily. One of these terms is gunite (also known as shotcrete).
With this process, a highly trained technician loads dry concrete mixture into a hopper, and compressed air shoots it through a specialized nozzle, creating your pool shell. It allows the nozzle to manage the consistency of the concrete, ensuring that your new pool walls and floor are of the highest quality possible.
Shims are long, thin beams with a slight wedge to them, and when placed in the gap between the window and frame, they help keep the level of the window firmly in place. After the shims are in place, an expanding foam is applied around the rim.
Install the Hardware
Adding an inground pool is a cherished investment whether you want to swim laps or enjoy a poolside barbecue. But before you start picturing poolside fun, take some time to consider the best type of pool for your backyard.
Choosing the best pool for your yard comes down to style and customization, cost, durability, and maintenance needs.
Building a concrete pool requires three to six months from the permit process to completion.
