Are you noticing moss on roofs? If so, don’t attempt a DIY fix. Even the smallest amount of moss can quickly turn into a large amount.
Your first step should be to call a professional company to assess and clean your roofs. While cleaning your roof may seem like an easy task, it could result in serious physical injuries. You could also end up doing more damage than good.
Read on to learn the best way to prevent moss from growing in your home.
Safety First
Getting rid of moss on a roof can be a tricky task, but following safety measures can help ensure it is done correctly. Make sure to wear the appropriate safety gear when cleaning the roof. This includes the following:
- Hard hat
- Gloves
- Safety goggles
- Non-skid shoes
- Safety Boots
The next step is to remove the moss from the roof. Use a stiff bristled brush to scrape the moss away from the tiles or shingles. Finally, use a cleaning solution made of one part bleach to three parts water and a garden hose to rinse the area where the moss used to be.
It is important to thoroughly rinse the area as any remaining bleach on the roof can damage it. Following these steps can help ensure a roof is cleaned while still being mindful of safety.
Brushing Off Loose Moss
This is an environmentally friendly way to get rid of moss on your roof as no chemicals are used. Start by brushing off the loose moss on the roof with a long-handled broom. The most efficient, effective, and safe method is to use a long-handled broom.
The “walk-on” bristles should be strong and stiff enough to be able to remove the moss but also soft enough not to damage the tiles. Use a slow, gentle brushing motion to prevent the tiles from cracking and breaking. Apply a light pressure just enough to remove the moss and dirt.
Make sure to brush off all the moss from the roof, including between tiles, and flush with the edge of the tile. Be aware to not scratch the tiles, as this may cause damage that may shorten the expiration date of your roof. Try to brush all of the loose moss from the roof in just one round.
Applying a Moss Killer
Applying a moss killer can be a good way to start. The process includes wetting down the roof with a hose, applying a moss-killer mixture, waiting for a few days, and then rinsing off the roof with a hose. The moss killer mixture can consist of a combination of water, bleach, detergent, and salt.
The bleach and salt help to kill the moss, while the detergent helps as a surfactant to keep the mixture from running off the roof. As with any chemical, follow the instructions on the container carefully to ensure no harm comes to plants or people. Doing so will help to ensure the job is done efficiently and safely.
Letting the Moss Killer Settle
Once you’ve applied the moss killer to the roof, let it settle for some time before commencing treatment. Typically the moss killer needs about 12 hours to be effective. You must wait before proceeding as you need to give the moss killer the time necessary to penetrate the moss and its roots.
After letting it settle, brush off the dead moss thoroughly, using a soft-bristled brush to help avoid damaging the roof. Try to scrub it as gently and thoroughly as possible, taking plenty of time to ensure that you have removed all of the moss and moss remnants effectively. Finally, rinse the roof with a garden hose to remove any remaining moss killer from the surface.
Gentle Scrubbing
Start by using a soft-bristled brush and warm water to loosen the moss. Be sure not to scrub too hard, which could damage the shingles. Afterward, you can use a bit of mild dish soap plus warm water.
Gently scrub once more and then rinse off any soap residue with a hose. You may need to leave the solution on to penetrate and soften the moss for a few minutes. Make sure to keep an eye on the surrounding areas for any discoloration due to the detergent or the scrubbing process interchanging with different tools.
When finished, rinse the area with the hose again to remove the moss and residue from your roof. Finally, dispose of moss and any debris promptly and thoroughly. If you want to know more about roof cleaning, continue browsing and reading this article.
Rinsing the Roof
To begin, the homeowner should power wash a roof surface with a garden hose. This should be done in an up-and-down motion to remove all the debris and dirt. After this is complete, a garden sprayer should be used.
Fill the sprayer with an anti-moss solution, and spray evenly over the surface of the roof. Allow the solution to penetrate for the time stated on the product instructions, which should be between 10 and 30 minutes.
Once you are finished, rinse the roof again with cold water to remove the product and any remaining moss. Regularly cleaning and rinsing your roof will help prevent moss from growing and will help keep your roof in great condition.
Preventative Measures
To prevent moss on the roof, there are several steps you should take. Firstly, trim any overhanging trees and branches, as the shade these create can cause excessive moisture buildup on your roof which invites moss to grow. Secondly, maintain regular roof cleaning and inspections to ensure that dead leaves and debris do not accumulate.
Apply zinc or copper strips on the roof, as these metals discourage moss growth. Finally, treat your roof with special anti-fungal and moss-killing products to reduce the risk of moss infestation. All of these measures will help not only get rid of moss on your roof but also to prevent it from returning in the future.
Follow These Steps on How to Get Rid of Moss on Roof
Moss on roofs can be challenging and time-consuming, but with the right knowledge and diligence, homeowners can get rid of moss. Make sure you clean your roof regularly to prevent moss growth and eliminate any existing moss by brushing or spraying it off.
For the best results, consider investing in professional moss roof removal services – they’ll have the tools and knowledge to remove moss quickly and safely.
Did you learn something from this article? Browse our page for more helpful and interesting topics.
